COMING SOON NEW DEVICE PRODUCT CATEGORY BRAND ABOUT US CONTACT US HITFAR BUZZ

We've got it.

iPhone 5/5S/SE Evutec Red/Black (Kozane) Karbon SP Series case

SKU: 9845EVAP5SSP | UPC: 700987146882 | MSRP: $59.99



 SKUProduct DescriptionColorStatusStockPriceVolQty
  9845EVAP5SSP
iPhone 5/5S/SE Evutec Red/Black (Kozane) Karbon SP Series case
Special order item – this item requires a lead time between placing an order and receiving product. This may take up to three weeks unless otherwise specified. Minimum purchase quantities may apply.
  9859EVAP5SSP
iPhone 5/5S/SE Evutec Black/Grey (Osprey) Karbon SP Series case
Special order item – this item requires a lead time between placing an order and receiving product. This may take up to three weeks unless otherwise specified. Minimum purchase quantities may apply.



Evutec

Protect your iPhone 5/5S/SE with the Evutec Karbon SP Series protective 2-piece case that is double-layered with a 0.7mm outer shell, made of DuPont™ Kevlar®* woven fibers, and a TPU shock absorbing layer that wraps around the device to provide additional protection in a form-fitted design.

Evutec Karbon S Series


*Dupont™ Kevlar® is an advanced composite material with a unique combination of high strength, high modulus, toughness and thermal stability. It’s 5 times stronger than steel on an equal-weight basis, and used successfully in ballistic applications, ropes and cables, protective apparels such as cut-resistant gloves, in life protection uses such as helmets, vehicle armoring, etc.
Evutec Karbon case step 1

Step 1: Gathering Fibers
Each and every Evutec case goes through an intensive multi-step process to be constructed starting with the preparation of its main component; DuPont™ Kevlar®. DuPont™ Kevlar® is created by gathering thousands of individual strands and combining them to form one single strand. This strand is 0.7mm thin; that`s thinner than the average strand of human hair.

Evutec Karbon case step 2

Step 2: Weaving Process
These strands are then woven into a flexible fabric that can be molded into a variety of different shapes.



Evutec Wood case step 3

Step 3: Dipping
After weaving is completed the fabric is dipped to hold all strands in place.



Evutec Karbon case step 4

Step 4: Forming
The now pliable Kevlar® fabric is heat molded to form the shape of a protective cellphone snap case that is only 0.7mm thin.



Evutec Karbon case step 5

Step 5: Laser Cutting
Multi-angled lasers are used to cut out the openings for buttons, camera lens, headphone jack and charging dock.




Evutec Karbon case step 6

Step 6: Evutouch™ Coating
Every Evutec protective case is finished with an extensive 5 step Evutouch™ Coating process to ensure the end product is smooth and durable. After an Evutouch™ coat is layered onto the case it is them allowed to dry before being polished to a sleek shine. These steps are repeated until the fifth Evutouch™ coating is applied making certain that not only will the case be beautiful but resistance to scratches
from everyday use.


Evutec Karbon S Series Diagram

Evutec cases don’t contain any metal properties and will not block your GPS, Wi-Fi, or cellular signal


Key Features

Strong material – 5 times stronger than steel at the same weight
Shockproof – 1.3mm inner TPU layer adds extra level of protection
Slim profile – 2mm thin lightweight design
Durable – Unlike plastic, DuPont™ Kevlar® woven fibers won’t crack or chip
Scratch-resistant coating – Every Evutec case is finished with a 5-step coating process to ensure smoothness, scratch protection and durability


COMPATIBILITY:

Apple: iPhone 5/5S/SE